The largest member of the Future Power Generation
CIOKS 8 is their largest switch-mode power supply expander and it features 8 isolated outlets which each deliver 9V DC at 660mA. All outlets offer four selectable voltages (9, 12, 15 or 18V).
CIOKS 8 was mainly designed to be used as a large extension to the DC7 power supply in case you need more outlets. If you want to use CIOKS 8 as an extension to the DC7, simply connect CIOKS 8 to the courtesy 24V outlet on your DC7 with the included 24V DC Link cable and you are good to go.
If you are looking for a super powerful power supply setup to power a large pedalboard, the combination of CIOKS DC7 and CIOKS 8 will definitely be an awesome solution where this combo will give you 15 isolated outlets in total plus a 5V USB outlet to charge your smartphone or tablet.
Features:
- Expand you CIOKS DC7 power supply with 8 additional isolated outlets
- CIOS 8offers a compact one-inch profile
- Low weight (0.75 lb)
- Ultra-low noise achieved by multi-stage filtering
- 8 isolated DC-outlets, 6W each, 660mA @ 9V
- 4 selectable voltages on each outlet (9,12, 15 or 18V)
- Individual status LED on each outlet and a global status LED
- Power it with CIOKSA DC7 or another strong 24V DC source
- Total maximum output power 48W
- Mounting hardware for Pedaltrain and Temple Audio boards is included
- Compatible with CIOKS GRIP, for drill-free Pedaltrain mounting
- 12 Flex cables included
- Designed in Denmark, assembled in Poland
- 5-year worldwide warranty
What's in the Box?
- CIOKS DC8 power supply
- 12 Flex cables:
- Standard Flex type 1 – black with 5,5/2,1mm centre negative DC plug x7
- Standard Flex type 2 – red with 5,5/2,1mm centre positive DC plug x1
- Standard Flex type 4 – green with 5,5/2,5mm centre positive DC plug x1
- Standard Flex type 5 – black with tip positive 3,5mm Jack plug x1
- Split Flex type 1 – black with two 5,5/2,1mm center negative DC plugs x1
- 3-way daisy chain Flex type 1 – black with three 5,5/2,1mm center negative DC plugs x1
- 50cm DC Link cable
- Mounting hardware: 2 screws and a hex-key
- Product sheet (drill guide)
- Flex and DC Link cable selection guide
- Sticker (sheet with 2pcs.)
- Manual
